Baseline Mpls Label - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

baseline mpls label

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
baseline mpls label { interface interfaceName atm vpi vci | labelValue }
Command introduced in JunosE Release 7.1.0.
Sets a statistics baseline for the specified MPLS in label. Statistics for an in label must
be enabled with the mpls statistics label command before they can be baselined. By
default, the in-label counters are baselined at zero. There is no no version.
interfaceName—Name of interface for label in interface label space on an ATM AAL5
interface; up to 15 alphanumeric characters
vpi—Virtual path identifier for a label, a value in the range 0–255
vci—Virtual circuit identifier for a label, a value in the range 33–65535
labelValue—Integer identifying a label in the platform label space, a value in the range
16–1048575
Privileged Exec
Chapter 3: B Commands
255