Baseline Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

baseline interface

Syntax
Release Information
Description
Options
Mode
226
baseline interface interfaceType interfaceSpecifier [ vcd ]
Command introduced before JunosE Release 7.1.0.
Sets a statistics baseline for an interface or a specific ATM virtual circuit. The router
implements the baseline by reading and storing the statistics at the time the baseline is
set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
There is no no version.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
vcd—Virtual circuit descriptor; number in the range 1–4294967295; an identifier for the
VC in other commands (ATM interfaces only)
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.