JunosE 11.3.x Command Reference Guide A to M
baseline clns
Syntax
Release Information
Description
Options
Mode
220
baseline clns [ interfaceType interfaceSpecifier ]
Command introduced before JunosE Release 7.1.0.
Sets a statistics baseline for CLNS. The router implements the baseline by reading and
storing the statistics at the time the baseline is set and then subtracting this baseline
whenever baseline-relative statistics are retrieved. There is no no version.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.