Atm Classifier-List - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

atm classifier-list

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
atm classifier-list classifierName [ traffic-class trafficClassName ]
[ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ]
[ clp clpValue ]
no atm classifier-list classifierName [ classifierNumber ]
Command introduced in JunosE Release 7.1.0.
Creates a classifier control list that can only be used in ATM policy lists. The no version
removes the ATM classifier control list. ATM packets are classified on CLP. The CLP bit
is not available on frame-based interfaces on E Series Broadband Services Router line
modules.
classifierName—Name of the classifier control list entry
trafficClassName—Name of the traffic class to match
green—Matches packet color to green, indicating a low drop preference
yellow—Matches packet color to yellow, indicating a medium drop preference
red—Matches packet color to red, indicating a high drop preference
userPacketClassValue—User packet value to match in the range 0–15
clpValue—Value of the CLP, 0 or 1
classifierNumber—Index of the classifier control list entry to be deleted
Global Configuration
Creating or Modifying Classifier Control Lists for ATM Policy Lists
Chapter 2: A Commands
165