Display Garp Timer - H3C s3100 series Command Manual

Number Of Frames Discarded
Table 1-1 Description on the fields of the display garp statistics command
Number of GVRP Frames Received
Number of GVRP Frames Transmitted
Number of Frames Discarded

display garp timer

Syntax
display garp timer [ interface interface-list ]
View
Any view
Parameters
interface-list: Specifies a list of Ethernet ports of which the GARP timer settings are to be displayed. In
this list, you can specify individual ports and port ranges. An individual port takes the form of
interface-type interface-number and a port range takes the form of interface-type interface-number1 to
interface-type
interface-number1. The total number of individual ports and port ranges defined in the list must not
exceed 10.
Description
Use the display garp timer command to display the settings of the GARP timers on specified ports or
all ports.
If the interface interface-list keyword-argument combination is not specified, this command displays
the GARP timer settings of all ports.
This command displays the settings of the following timers:
Join timer
Leave timer
LeaveAll timer
Hold timer
Related commands: garp timer, garp timer leaveall.
Examples
# Display the settings of the GARP timers on port Ethernet1/0/1.
<Sysname> display garp timer interface Ethernet 1/0/1
GARP timers on port Ethernet1/0/1
Field
interface-number2, with
Garp Join Time
: 0
Number of the GVRP frames received on the
port
Number of the GVRP frames transmitted through
the port
Number of GVRP frames discarded by the port
interface-number2 taking
: 20 centiseconds
1-2
Description
a value greater than