Display Garp Timer - H3C MSR Series Command Reference Manual

Number of Frames Discarded
GARP statistics on port Ethernet1/2
Number of GVRP Frames Received
Number of GVRP Frames Transmitted
Number of Frames Discarded
Related commands
reset garp statistics

display garp timer

Use display garp timer to display GARP timers on specific ports. If no ports are specified, this
command displays the GARP timers on all ports.
Syntax
display garp timer [ interface interface-list ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-list: Displays the GARP timer settings of one or multiple ports. You can specify up
to 10 port lists. By using each port list, you can specify a single port in the form of interface-type
interface-number, or a port range in the form of interface-type interface-number1 to interface-type
interface-number2, where the end port number specified by interface-number2 must be greater than
the start port number specified by interface-number1.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display GARP timers on port Ethernet 1/1.
<Sysname> display garp timer interface ethernet 1/1
GARP timers on port Ethernet1/1
Related commands
•
garp timer hold
•
garp timer join
Garp Join Time
Garp Leave Time
Garp LeaveAll Time
Garp Hold Time
: 1
: 3
: 4
: 2
: 20 centiseconds
: 60 centiseconds
: 1000 centiseconds
: 10 centiseconds
116