Display Ssh Server-Info - H3C S3100 Series Command Manual

SSH connection timeout : 60 seconds
SSH Authentication retries : 3 times
SFTP Server: Disable
SFTP idle timeout : 10 minutes
If you use the ssh server compatible-ssh1x enable command to configure the server to be
compatible with SSH1.x clients, the SSH version will be displayed as 1.99.
If you use the undo ssh server compatible-ssh1x command to configure the server to be not
compatible with SSH1.x clients, the SSH version will be displayed as 2.0.
# Display session information about the SSH Server.
<Sysname> display ssh server session
Conn Ver
VTY 0 2.0
VTY 1 2.0
Table 1-1 Description on the fields of the display ssh server session command
Conn
Ver
Encry
State
Retry
SerType
Username

display ssh server-info

Syntax
display ssh server-info
View
Any view
Parameters
None
Description
Use the display ssh server-info command on an SSH client to display the mappings between SSH
servers and their public keys saved on the client.
Encry State Retry
AES started 0
AES started 0
Field
SerType Username
stelnet kk
sFTP abc
Number of VTY interface used for user login
SSH version
Encryption algorithm used by SSH
Session status
Number of connection retries
Service type
User name
1-7
Description