Table of Contents
Advertisement
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display fr map-info command to display all frame relay address mappings or the one for the
specified frame relay interface.
This command displays whether the static address map entries are correct and whether dynamic address
mapping operates properly.
Related commands: fr map ip and fr inarp.
Examples
# Display the frame relay address map table.
<Sysname> display fr map-info
Map Statistics for interface Serial4/1/8:10(DTE)
DLCI = 100, IP INARP 100.100.1.1, Serial4/1/8:10
create time = 2010/10/21 14:48:44, status = ACTIVE
encapsulation = ietf, vlink = 14, broadcast
DLCI = 200, IP INARP 100.100.1.1, Serial4/1/8:10
create time = 2010/10/21 14:34:42, status = ACTIVE
encapsulation = ietf, vlink = 0, broadcast
DLCI = 300, IP 1.1.1.1, Serial4/1/8:10
create time = 2010/10/21 15:03:35, status = ACTIVE
encapsulation = ietf, vlink = 15
Table 14 Output description
Field
Map Statistics for interface
Serial4/1/8:10(DTE)
DLCI = 100, IP INARP
100.100.1.1, Serial4/1/8:10
create time = 2010/10/21
14:48:44
status = ACTIVE
encapsulation = ietf
vlink
broadcast
display fr pvc-info
Syntax
display fr pvc-info [ interface interface-type { interface-number | interface-number.subnumber } ]
[ dlci-number ] [ | { begin | exclude | include } regular-expression ]
Description
Display frame relay address mappings. The interface operates in DTE
mode.
The PVC with DLCI 100 is mapped to remote IP address 100.100.1.1
through InARP. The PVC is configured on interface Serial 4/1/8:10. If
the INAPP field is not displayed, it means the address mapping is
manually configured.
Time and date when the map entry was created.
State of the map entry.
Encapsulation is set to IETF.
Value of the route-to-frame relay address mapping. A value of 0 indicates
that the route is invalid, and a non-zero value means that the route is
valid. According to the value, the router can look up the map
corresponding to the route, and get the DLCI.
Broadcasts are permitted.
67
Advertisement
Table of Contents
