Fr Compression Stac Enable; Fr Dlci - H3C MSR810 Command Reference Manual

fr compression stac enable

Use fr compression stac enable to enable Frame Relay STAC compression on a Frame Relay VC.
Use undo fr compression stac enable to disable Frame Relay STAC compression on a Frame
Relay VC.
Syntax
fr compression stac enable
undo fr compression stac enable
Default
Frame Relay STAC compression is disabled on a Frame Relay VC.
Views
Frame Relay virtual circuit view
Predefined user roles
network-admin
Usage guidelines
To make STAC compression take effect on a PVC, you must enable STAC compression on both
ends of the PVC.
STAC compression works only when the encapsulation type is IETF on both ends of a PVC. If the
encapsulation type is not IETF when you enable STAC compression, the system automatically
changes the encapsulation type to IETF.
Frame Relay IPHC and STAC compression are mutually exclusive.
Examples
# Enable Frame Relay STAC compression on the VC with DLCI 100 on interface Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] fr dlci 100
[Sysname-Serial2/1/0-fr-dlci-100]fr compression stac enable

fr dlci

Use fr dlci to create a VC and enter its view, or enter the view of an existing VC.
Use undo fr dlci to delete a VC.
Syntax
fr dlci dlci-number
undo fr dlci [ dlci-number ]
Default
No VCs exist.
Views
Interface view (main interface or subinterface view)
Predefined user roles
network-admin
336