Table of Contents
Advertisement
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display fr statistics command to display current frame relay statistics about received and
transmitted packets for the specified or all frame relay interfaces.
You may use this command to check frame relay traffic statistics and diagnose problems.
Examples
# Display frame relay statistics about received and transmitted packets.
<Sysname> display fr statistics
Frame relay packet statistics for interface Serial4/1/8:10(DTE)
in packets = 84, in bytes = 1333
out packets = 92, out bytes = 1217
discarded in packets = 13, discarded out packets = 0
Frame relay packet statistics for interface Serial4/1/9:10(DCE)
in packets = 0, in bytes = 0
out packets = 0, out bytes = 0
discarded in packets = 0, discarded out packets = 0
Table 16 Output description
Field
Frame relay packet statistics for interface
Serial4/1/8:10(DTE)
in packets = 84, in bytes = 1333
out packets = 92, out bytes = 1217
discarded in packets = 13, discarded out packets = 0
fr dlci
Syntax
fr dlci dlci-number
undo fr dlci [ dlci-number ]
View
Interface view
Default level
2: System level
Description
Display frame relay packet statistics for the interface
Serial 4/1/8:10 (DTE), which operates as a DTE.
Received packets and bytes.
Sent packets and bytes.
Dropped incoming packets and dropped outgoing
packets.
70
Advertisement
Table of Contents
