Command Line Error Information; Edit Features - H3C S3610 Series Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S3610&S5510 Series Ethernet Switches
Note:
You may use arrow keys to access history commands in Windows 2000/XP Terminal or
Telnet. However, the up-arrow and down-arrow keys are invalid in Windows 9X
HyperTerminal, because they are defined in a different way. You can use <Ctrl+P> and
<Ctrl+N> instead.

1.1.5 Command Line Error Information

The commands are executed only if they have no syntax error. Otherwise, error
information is reported. Table 1-3 lists some common errors.
Table 1-3 Common command line errors
Error information
Unrecognized command
Incomplete command
Too many parameters
Ambiguous command
Wrong parameter

1.1.6 Edit Features

The CLI provides the basic command edit functions and supports multi-line editing. The
maximum length of each command is 256 characters. Table 1-4 lists these functions.
Table 1-4 Edit functions
Key
Common Keys
Backspace key
Left-arrow key or
<Ctrl+B>
The command was not found.
The keyword was not found.
Parameter type error
The parameter value is beyond the allowed range.
Incomplete command
Too many parameters are input.
Parameter value input is ambiguous.
Wrong parameter
If the editing buffer is not full, insert the character at the position
of the cursor and move the cursor to the right. Otherwise, the
alarm rings.
Delete the character to the left of the cursor and move the
cursor back one character. If the cursor gets to the beginning of
the command line, the alarm rings.
The cursor moves one character space to the left, and the alarm
rings when the cursor gets to the beginning of the command
line.
1-4
Chapter 1 Basic Configurations
Cause
Function