Ipsec Sa Negotiation Failed Because No Matching Ipsec Transform Sets Were Found; Ipsec Sa Negotiation Failed Due To Invalid Identity Information - H3C S5830V2 Security Configuration Manual

Hide thumbs Also See for S5830V2:
Table of Contents

Advertisement

Analysis
If the following debugging information appeared, the matched IKE profile is not referencing the
matched IKE proposal:
Failed to find proposal 1 in profile profile1.
If the following debugging information appeared, the matched IKE profile is not referencing the
matched IKE keychain:
Failed to find keychain keychain1 in profile profile1.
Solution
Verify that the matched IKE proposal (IKE proposal 1 in this debugging message example) is
referenced by the IKE profile (IKE profile 1 in the example).
Verify that the matched IKE keychain (IKE keychain 1 in this debugging message example) is
referenced by the IKE profile (IKE profile 1 in the example).
IPsec SA negotiation failed because no matching IPsec
transform sets were found
Symptom
1.
The display ike sa command shows that the IKE SA negotiation succeeded and the IKE SA is in RD
state, but the display ipsec sa command shows that the expected IPsec SA has not been negotiated
yet.
2.
The following IKE debugging message appeared:
The attributes are unacceptable.
Or:
Construct notification packet: NO_PROPOSAL_CHOSEN.
Analysis
Certain IPsec policy settings are incorrect.
Solution
1.
Examine the IPsec configuration to see whether the two ends have matching IPsec transform sets.
2.
Modify the IPsec configuration to make sure the two ends have matching IPsec transform sets.

IPsec SA negotiation failed due to invalid identity information

Symptom
1.
The display ike sa command shows that the IKE SA negotiation succeeded and the IKE SA is in RD
state, but the display ipsec sa command shows that the expected IPsec SA has not been negotiated
yet.
2.
The following IKE debugging message appeared:
Notification INVALID_ID_INFORMATION is received.
Or:
Failed to get IPsec policy when renegotiating IPsec SA. Delete IPsec SA.
Construct notification packet: INVALID_ID_INFORMATION.
279

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5820v2

Table of Contents