Configuring Device Name; Configuring System Clock - H3C S3610 Series Operation Manual

Operation Manual – System Maintenance and Debugging
H3C S3610&S5510 Series Ethernet Switches
Table 1-7 Follow these steps to switch CLI language mode
To do...
Switch CLI language
mode

1.2.3 Configuring Device Name

You can use the sysname command to set the device name. The set device name is
correlated to the CLI prompt. For example, if the device name is set to Sysname, the
prompt in user view will be <Sysname>.
Table 1-8 Follow these steps to configure the device name
Enter system view
Configure the device name

1.2.4 Configuring System Clock

To ensure that the device works with other devices properly, you need to set a correct
system clock.
Table 1-9 Follow these steps to configure the system clock
To do...
Set the standard time
Set the time zone
Set
summer time scheme
Use the command...
language-mode { chinese |
english }
To do...
system-view
sysname sysname
clock datetime time date
clock timezone time-zone-name { add |
minus } time
clock summer-time zone_name one-off
start-time
add-time
a daylight
clock summer-time zone-name repeating
{ start-time start-date end-time end-date |
start-time start-year start-month start-week
start-day end-time end-year end-month
end-week end-day } offset-time
Use the command...
Use the command...
start-date end-time
1-14
Chapter 1 Basic Configurations
Remarks
Optional
CLI language is English
by default.
Remarks
—
Optional
By default, the device
name is H3C.
Remarks
Optional
Optional
end-date
Optional