Display Debugging; Display Version - H3C s3100 series Command Manual

Example
# Display the current date and time of the system.
<Sysname> display clock
18:36:31 beijing Sat 2002/02/02
Time Zone : beijing add 01:00:00
Summer-Time : bj one-off 01:00:00 2003/01/01 01:00:00 2003/08/08 01:00:00
Table 1-1 Field description of the display clock command
18:36:31 beijing Sat 2002/02/02
Time Zone
Summer-Time

display debugging

Syntax
display debugging [ unit unit-id ] [ interface interface-type interface-number ] [ module-name ]
View
Any view
Parameter
unit-id: Unit ID of a switch, the value can only be 1.
interface-type: Interface type.
interface-number: Interface number.
module-name: Functional module name.
Description
Use the display debugging command to display enabled debugging on a specified device.
Example
# Display enabled debugging on unit 1.
<Sysname> display debugging unit 1
ARP packet debugging switch is on
TCP:
TCP packet debugging switch is on for task any socket any
IP icmp debugging is on

display version

Syntax
display version
Field
1-6
Description
Current date and time of the system
Configured time zone information
Configured summer time information