Dtc Mode Register A (Mra) - Renesas H8S/2368 Series Hardware Manual

8.2.1

DTC Mode Register A (MRA)

MRA selects the DTC operating mode.
Bit Bit Name Initial Value
7 SM1 Undefined
6 SM0 Undefined
5 DM1 Undefined
4 DM0 Undefined
3 MD1 Undefined
2 MD0 Undefined
1 DTS Undefined
0 Sz Undefined
Legend:
X : Don't care
R/W Description
−
Source Address Mode 1 and 0
−
These bits specify an SAR operation after a data
transfer.
0x: SAR is fixed
10: SAR is incremented after a transfer
(by +1 when Sz = 0; by +2 when Sz = 1)
11: SAR is decremented after a transfer
(by –1 when Sz = 0; by –2 when Sz = 1)
−
Destination Address Mode 1 and 0
−
These bits specify a DAR operation after a data
transfer.
0x: DAR is fixed
10: DAR is incremented after a transfer
(by +1 when Sz = 0; by +2 when Sz = 1)
11: DAR is decremented after a transfer
(by –1 when Sz = 0; by –2 when Sz = 1)
−
DTC Mode
−
These bits specify the DTC transfer mode.
00: Normal mode
01: Repeat mode
10: Block transfer mode
11: Setting prohibited
−
DTC Transfer Mode Select
Specifies whether the source side or the destination
side is set to be a repeat area or block area, in repeat
mode or block transfer mode.
0: Destination side is repeat area or block area
1: Source side is repeat area or block area
−
DTC Data Transfer Size
Specifies the size of data to be transferred.
0: Byte-size transfer
1: Word-size transfer
Rev. 2.00, 05/03, page 277 of 820