Renesas H8S/2368 Series Hardware Manual page 70

Type Symbol
IIC bus SCL1
interface2 SCL0
(IIC2)
IIC bus SDA1
interface (IIC) SDA0
A/D converter AN13,
AN12,
AN7 to
AN0
ADTRG
D/A converter DA3,
DA2
A/D converter, AV
cc
D/A converter
AV
ss
Vref
I/O ports P17 to
P10
P27 to
P20
P35 to
P30
P47 to
P40
P53 to
P50
Rev. 2.00, 05/03, page 18 of 820
Pin No.
TFP-120 QFP-128
115, 125,
113 123
116, 126,
114 124
104 to 95 114 to 105
112 122
104, 114,
103 113
93 103
105 115
94 104
41 to 34 47 to 40
49 to 42 55 to 48
113 to 118 123 to 128
102 to 95 112 to 105
112 to 109 122 to 119
I/O Function
Input/ IIC clock input/output pins.
output
Input/ IIC data input/output pins.
output
Input Analog input pins.
Input Pin for input of an external trigger to
start A/D conversion.
Output Analog output pins.
Input The analog power-supply pin for the
A/D converter and D/A converter.
When the A/D converter and D/A
converter are not used, this pin
should be connected to the system
power supply (+3 V).
Input The ground pin for the A/D
converter and D/A converter.
This pin should be connected to the
system power supply (0 V).
Input The reference voltage input pin for
the A/D converter and D/A
converter.
When the A/D converter and D/A
converter are not used, this pin
should be connected to the system
power supply (+3 V).
Input/ Eight-bit input/output pins.
output
Input/ Eight-bit input/output pins.
output
Input/ Six-bit input/output pins.
output
Input Eight-bit input pins.
Input/ Four-bit input/output pins.
output