Table 2.9
System Control Instructions
Instruction
Size*
TRAPA
–
RTE
–
SLEEP
–
LDC
B/W
STC
B/W
ANDC
B
ORC
B
XORC
B
NOP
–
Note:* Size refers to the operand size.
B: Byte
W: Word
Rev. 2.00, 05/03, page 46 of 820
Function
Starts trap-instruction exception handling.
Returns from an exception-handling routine.
Causes a transition to a power-down state.
(EAs) → CCR, (EAs) → EXR
Moves the memory operand contents or immediate data to CCR or
EXR. Although CCR and EXR are 8-bit registers, word-size transfers
are performed between them and memory. The upper 8 bits are valid.
CCR → (EAd), EXR → (EAd)
Transfers CCR or EXR contents to a general register or memory
operand. Although CCR and EXR are 8-bit registers, word-size
transfers are performed between them and memory. The upper 8 bits
are valid.
CCR ∧ #IMM → CCR, EXR ∧ #IMM → EXR
Logically ANDs the CCR or EXR contents with immediate data.
CCR ∨ #IMM → CCR, EXR ∨ #IMM → EXR
Logically ORs the CCR or EXR contents with immediate data.
CCR ⊕ #IMM → CCR, EXR ⊕ #IMM → EXR
Logically exclusive-ORs the CCR or EXR contents with immediate data.
PC + 2 → PC
Only increments the program counter.