A/D Converter Activation; Table 12.3 8-Bit Timer Interrupt Sources - Renesas H8S/2368 Series Hardware Manual

Table 12.3 8-Bit Timer Interrupt Sources

Name Interrupt Source
CMIA0 TCORA_0 compare match
CMIB0 TCORB_0 compare match
OVI0 TCNT_0 overflow
CMIA1 TCORA_1 compare match
CMIB1 TCORB_1 compare match
OVI1 TCNT_1 overflow
12.7.2

A/D Converter Activation

The A/D converter can be activated only by TMR_0 compare match A.
If the ADTE bit in TCSR0 is set to 1 when the CMFA flag is set to 1 by the occurrence of TMR_0
compare match A, a request to start A/D conversion is sent to the A/D converter. If the 8-bit timer
conversion start trigger has been selected on the A/D converter side at this time, A/D conversion is
started.
Interrupt Flag DTC Activation
CMFA Possible
CMFB Possible
OVF Not possible
CMFA Possible
CMFB Possible
OVF Not possible
Rev. 2.00, 05/03, page 487 of 820
Priority
High
Low
High
Low