Tcp Established - Avaya G450 Cli Reference Manual

CLI Commands
To specify that rule 22 applies to all packets except for those whose destination port is 300:
G450-001(ACL 330/ip rule 22)# not tcp destination-port eq 300
Related Commands - Policy-based routing
destination-ip,
capture-list, source-ip,
Related Commands - Policy
composite-operation, destination-ip,
dscp-table, show isdn bri
udp source-port
Related Commands - VPN
description (ip
icmp, ip crypto-list, ip-protocol,
show ip crypto-list,

tcp established

Use the tcp established command to specify that the current rule applies only to packets
that are part of an established TCP session. Use the no form of the command to specify that the
current rule applies to any TCP packets.
Note:
The tcp established and no tcp established commands also set the IP
Note:
protocol to TCP.
Syntax
[no] tcp established
User Level
read-write
Context
ip access-control-list ip-rule
Example
To specify that rule 27 applies only to packets from an established TCP session:
G450-001(ACL 330/ip rule 27)# tcp established
Rule protocol changed.
698 Avaya G450 CLI Reference
dscp (policy-based routing, packet sniffing,
tcp source-port,
link, source-ip,
rule), destination-ip, dscp (policy-based routing, packet sniffing,
ip-rule
tcp source-port, udp
udp destination-port,
dscp (policy), icmp, show
tcp established, tcp
(VPN), local-address,
destination-port, udp source-port
Policy - access control lists
VPN), icmp, ip-protocol,
udp source-port
composite-operation,
source-port, udp destination-port,
VPN), fragment,
protect crypto map, source-ip,
show ip
show