Gre Tunneling; Interface Tunnel - Avaya G450 Cli Reference Manual

CLI Commands

GRE tunneling

interface tunnel

Use the interface tunnel command to enter Interface Tunnel configuration mode. Use the
no form of this command to delete an interface tunnel.
If the specified interface does not exist, the system creates it and enters its configuration mode.
Syntax
[no] interface tunnel tunnel_number
Parameters
Parameter
tunnel_number
User Level
read-write
Context
general
Example
To create interface tunnel 1 and enter its configuration mode:
G450-001(super)# interface tunnel 1
Related Commands - IP interface configuration
description (interface),
serial, interface
load-interval, show ip interface brief
Related Commands - GRE tunneling
interface fastethernet,
442 Avaya G450 CLI Reference
Description
The number of the interface
interface console,
USB-modem, interface
tunnel dscp, tunnel mode
interface fastethernet,
vlan, ip address, ip admin-state,
GRE tunneling
Possible Default
Values Value
1-99
interface loopback, interface
ip broadcast-address,