Next-Server - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - Policy-based routing
ip-rule (policy, policy-based routing, packet
Related Commands - Policy
composite-operation, cookie, ip-fragments-in, ip-option-in,
packet sniffing), owner,
list, cos, dscp (policy)

next-server

Use the next-server command to specify the IP address of the next server in the boot
process of a DHCP client. Use the no form of this command to clear the next server IP address.
Syntax
[no] next-server ip-address
Parameters
Parameter
ip-address
User Level
read-write
Context
dhcp pool
Example
To set 1.1.1.1 as the IP address of the next server in the boot process of a DHCP client:
G450-001(DHCP 5)# next-server 1.1.1.1
Related Commands
bootfile, client-identifier, default-router, dns-server, domain-name, end-ip-addr, lease, name,
option, server-name,
vendor-specific-option
306 Avaya G450 CLI Reference
show composite-operation,
Description
The IP address of the next
server in the boot process
of a DHCP client
show ip dhcp-pool, start-ip-addr, subnet-mask, value,
sniffing), owner, show isdn bri
ip-rule (policy, policy-based routing,
show dscp-table,
Possible Values
IP address
DHCP server
link, show list
show isdn bri link, show
Default Value
0.0.0.0