Copy Running-Config Ftp - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
copy running-config
running-config
copy tftp startup-config,
status, show erase

copy running-config ftp

Use the copy running-config ftp command to upload the current configuration to a file
on an FTP server. The command prompts for the username and password. Uncommitted
changes to the configuration are included.
Note:
After you change the configuration, run the copy running-config
Note:
startup-config command to save the changes. If you do not save the
changes, the device loses the changes when you reset it.
Syntax
copy running-config ftp filename ip
Parameters
Parameter
filename
ip
User Level
read-write
Context
general
Example
To upload the current configuration to
using login dan:
G450-001(super)# copy running-config ftp c:\config_files\router1.cfg
135.64.10.33
Username: dan
Password:
226 Avaya G450 CLI Reference
ftp, copy running-config
tftp, copy startup-config
erase startup-config,
status, show logging file
Description
File name to create on the FTP server
IP address of the FTP server
scp, copy running-config
ftp, copy startup-config
nvram initialize,
condition, show
on the ftp server at IP address 135.64.10.33
G450.cfg
Configuration files
startup-config,
scp, copy startup-config
show copy status, show download
running-config, show startup-config
Possible Default
Values Value
copy
tftp,