Copy Startup-Config Tftp - Avaya G450 Cli Reference Manual

copy startup-config tftp

Use the copy startup-config tftp command to upload the current configuration to a file
on a TFTP server. Uncommitted changes to the configuration are not included.
To use this command, you need to have an active TFTP server. If Avaya Network Manager is
running, you do not require an additional TFTP server.
Note:
After you change the configuration, run the copy running-config
Note:
startup-config command to save the changes. If you do not save the
changes, the device loses the changes when you reset it.
Syntax
copy startup-config tftp filename ip
Parameters
Parameter
filename
ip
User Level
read-write
Context
general
Example
To upload the current configuration to
135.64.10.33:
G450-001(super)# copy startup-config tftp G450.cfg 135.64.10.33
Related Commands
copy ftp startup-config,
startup-config,
tftp startup-config,
status, show erase
Description
Name of file to create on TFTP server
IP address of TFTP server
copy running-config
copy running-config tftp,
erase startup-config,
status, show logging file
on the TFTP server at IP address
G450.cfg
ftp, copy running-config
copy startup-config ftp,
nvram initialize, show copy
condition, show
Configuration files
Possible Default
Values Value
scp, copy running-config
copy startup-config
status, show download
running-config, show startup-config
Issue 1 January 2008
scp, copy
233