Show Restart-Log - Avaya G450 Cli Reference Manual

CLI Commands
Example
To show recovery information:
G450-001(super)# show recovery
RECOVERY TIMES
--------------------------------
Primary Search
Total Search
Transition Point: 1
Related Commands
set utilization cpu,
restart-log, show
voltages, test led

show restart-log

Use the show restart-log command to retrieve restart data that is stored in a log in flash
memory.
Syntax
show restart-log
User Level
read-only
Context
general
Example
To display restart information:
G450-001(super)# show restart-log
RESET ID MM/DD-hh:mm:ss.hs STR
---------- ------------------- ------------------------------------
0000000000 01/01-02:54:17.00 MgFw#:48.46.48 REBOOT
0000000000 01/01-02:54:12.00 MgFw#:48.46.48 WWD-STYCRINO-XXXXX REBOOT from
RecoveryEngineUti
EOF
266 Avaya G450 CLI Reference
: 1
: 30
show faults, show mg
download, show system,
list_config, show mgc,
show temp, show timeout,
Device status
show mm, show module,
show utilization,
show
show