Show Ip-Rule - Avaya G450 Cli Reference Manual

CLI Commands
Example
To specify that rule 22 applies to all packets having an IP protocol of ICMP:
G450-001(ACL 330/ip rule 22)# ip-protocol icmp
To specify that rule 22 applies to all packets having any IP protocol except ICMP:
G450-001(ACL 330/ip rule 22)# not ip-protocol icmp
Related Commands
destination-ip,
source-ip, tcp
Related Commands - VPN
description (ip
icmp, ip crypto-list,
crypto-list, tcp

show ip-rule

Use the show ip-rule command to display the attributes of a specific rule. Leave the
rule_number parameter blank to display all rules.
Syntax
show ip-rule [rule_number]
Parameters
Parameter
rule_number
User Level
read-write
Context
ip access-control-list, ip access-control-list/ip-rule, ip qos-list, ip qos-list/ip-rule, ip capture-list,
ip capture-list/ip-rule, ip pbr-list, ip pbr-list/ip-rule
658 Avaya G450 CLI Reference
dscp (policy-based routing, packet sniffing,
destination-port, tcp source-port,
rule), destination-ip, dscp (policy-based routing, packet sniffing,
ip-rule (VPN), local-address,
destination-port, tcp source-port,
Description
The specific rule for which attributes are
displayed
VPN), icmp,
udp destination-port, udp source-port
protect crypto map, source-ip,
udp destination-port,
Packet sniffing
show ip capture-list,
VPN), fragment,
show ip
udp source-port
Possible Default
Values Value