Copy Usb Sw_Image - Avaya G450 Cli Reference Manual

Parameter
source-filename
module-number
User Level
Admin
Context
general
Example
To download the firmware file,
the gateway:
G450-001(super)# copy usb module usb-device0 \temp\mm714v67.fdl 3
Related Commands
backup config usb,
show backup status,

copy usb SW_image

Use the copy usb SW_image command to download a software from the external USB mass
storage device into Bank A or Bank B.
Syntax
copy usb {SW_imageA | SW_imageB} source-usb-device source-filename
Parameters
Parameter
source usb-device
source-filename
Description
The full name and path of the file to be
downloaded
The slot number of the media module
being upgraded
mm714v67.fdl
copy announcement-file
show restore status,
Description
The source USB mass storage device
The full name and path of the file to be
downloaded
, from usb-device0 to the media module in slot 3 of
usb, erase usb, restore
show usb
Firmware management
Possible Default
Values Value
usb, safe-removal usb,
Possible Default
Values Value
usb-device0
Issue 1 January 2008 403