Dialer Order - Avaya G450 Cli Reference Manual

CLI Commands

dialer order

Use the dialer order command to set which dial strings are used upon a new dial trigger
event. Use the no form of the command to clear the order. The default value is sequential.
Syntax
[no] dialer order {sequential | round-robin | last-successful}
Parameters
Parameter
sequential
round-
robin
last-
successful
User Level
read-write
Context
interface:Dialer (L2, L2-L3)
Example
To set that the last successful dial string is used upon a new dial trigger event:
G450-001(if:Dialer 1)# dialer order last-successful
Related Commands
interface dialer,
persistent initial
dialer wait-for-ipcp
326 Avaya G450 CLI Reference
Description
Restart from beginning of dial list. This is the
default.
Restarts dialing using the dial string following
the most recently used dial string
Restarts dialing using the most recently
successful string and continues to the next dial
string in a list if a call fails
dialer modem-interface,
delay, dialer persistent
dialer persistent, dialer persistent
max-attempts, dialer persistent
Dialer interface
Possible Default
Values Value
delay, dialer
re-enable, dialer string,