Ethernet Port Configuration; Set Port Auto-Negotiation-Flowcontrol-Advertisement - Avaya G450 Cli Reference Manual

Ethernet port configuration

set port auto-negotiation-flowcontrol-advertisement

Use the set port auto-negotiation-flowcontrol-advertisement command to set
the flowcontrol advertisement for the specified port when performing auto-negotiation.
Syntax
set port auto-negotiation-flowcontrol-advertisement module/port
{no-flowcontrol|asym-tx-only|sym-only|sym-and-asym-rx}
Parameters
Parameter
module
port
no-flowcontrol
asym-tx-only
sym-only
sym-and-asym-rx
User Level
read-write
Context
general
Description
Number of the module
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 10/5-6
for both ETH LAN ports 5-6 on the front
panel.
Keyword specifying that the port will
advertise no pause capabilities
Keyword specifying that the port will
advertise asymmetric Tx pause
capabilities only
Keyword specifying that the port will
advertise symmetric pause capabilities
only
Keyword specifying that the port will
advertise both symmetric and asymmetric
Rx pause capabilities
Ethernet port configuration
Possible Default
Values Value
Issue 1 January 2008 375