Snmp-Server Remote-User - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager

snmp-server remote-user

Use the snmp-server remote-user command to configure settings for a remote SNMPv3
user. If the user does not exist, it is created. Use the no form of the command to remove the
user from specific groups. If no groups are specified, the user is removed from all groups.
Syntax
snmp-server remote-user username engineID groupname [auth {md5|sha}
auth-password [priv des56 priv-password]]
no snmp-server remote-user username [groupname]
Parameters
Parameter
username
engineID
groupname
md5
sha
auth-password
priv-password
1082 Avaya G450 CLI Reference
Description
A character string specifying the
username of this user
The remote device Engine ID for this user
A character string specifying the
groupname this user is associated with
Keyword specifying to use the
MAC-MD5-96 authentication protocol
Keyword specifying to use the
HMAC-SHA-96 authentication protocol
A character string no longer than 64
characters specifying the authentication
password. An authentication password is
required if the auth keyword is used. The
minimum length is 8 characters.
A character string no longer than 64
characters specifying the privacy
password. The minimum length is 8
characters.
SNMP access configuration
Possible Default
Values Value
A string of
up to 32
characters
A string of
up to 32
characters