Shutdown (Usb Modem); Timeout Absolute - Avaya G450 Cli Reference Manual

shutdown (USB modem)

Use the shutdown command to disable the USB interface. When the interface is disabled, calls
to the modem are immediately hung up. No PPP initialization is performed, and there is no
access to the device.
Use the no form of this command to enable the USB interface. For security reasons, the USB
interface is disabled by default. The USB modem can only be connected after the interface is
manually brought up using this command.
Syntax
[no] shutdown
User Level
For shutdown: read-write
For no shutdown: admin
Context
interface:USB-modem
Example
To disable the USB interface:
G450-001(super-if:USB-modem)# shutdown
Related Commands
async reset-modem (USB

timeout absolute

timeout absolute
Use the timeout absolute command to set the number of minutes until the system
automatically disconnects an idle PPP incoming session.
Syntax
timeout absolute time
port), ip address, ppp
Modem configuration – USB modem port
authentication, shutdown (USB
Issue 1 January 2008
modem),
589