Tunnel Key - Avaya G450 Cli Reference Manual

CLI Commands
User Level
read-write
Context
Interface: Tunnel (L2, L2-L3)
Example
To override the original packet DSCP with DSCP value 0:
G450-001(super)# tunnel dscp 0
Related Commands
interface fastethernet,

tunnel key

Use the tunnel key command to instruct the router to send GRE packets with a security key
number. The tunnel endpoint must also be configured to use a security key, and the key
numbers must be identical. If a security key is not configured on the tunnel endpoint, or a
different key number is used, the packets are discarded. Use the no form of the command to
specify that no security key should be sent.
Syntax
tunnel key key_id
no tunnel key
Parameters
Parameter
key_id
User Level
read-write
Context
Interface: Tunnel (L2, L2-L3)
446 Avaya G450 CLI Reference
interface tunnel, tunnel mode
Description
The ID number of the security key to
be sent with GRE packets
GRE tunneling
Possible Default
Values Value
0-2147483647