Show Voip-Parameters - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - QoS
set qos bearer,
Related Commands - RSVP
set qos rsvp
Related Commands - RTCP
set qos rtcp

show voip-parameters

Use the show voip-parameters command to display information about the VoIP engine.
Syntax
show voip-parameters
User Level
read-only
Context
general
Examples
To display VoIP information:
G450-001(super)# show voip-parameters
VOIP ENGINE PARAMETERS
---------------------------------------------------------
IP (PMI)
DSP Firmware Version
Fault Status
Additional Status
842 Avaya G450 CLI Reference
set qos control, set qos signal
: 149.49.78.140
: N/A
: No Fault Messages
: No Status Messages
QoS