Set Codeset-National - Avaya G450 Cli Reference Manual

CLI Commands
japan-disconnect,
supervision, set
trunk-group

set codeset-national

Use the set codeset-national command to identify which Q.931 codesets are allowed to
send National Information Elements (IEs, or display information) to the user phone in SLS.
Note:
This command only applies to ISDN trunks.
Note:
Syntax
set codeset-national codeset
Parameters
Parameter
codeset
User Level
read-write
Context
sls > trunk-group
Example
To specify that codeset6 is allowed to send National Information Elements to the user phone:
G450-001 (sls-trunk-group-<tgnum>)# set codeset-national codeset6
Related Commands
add port, clear
cbc-service-feature,
digit-handling,
japan-disconnect,
supervision, set
trunk-group
1046 Avaya G450 CLI Reference
set name, set numbering-format,
tac, set trunk-hunt, set
Description
The Q.931 codeset that sends National
IE display information to the user
phone.
Note: This value depends on the local
central office switch.
tac, clear trunk-group,
set channel-preference,
set digit-treatment, set
set name, set numbering-format,
tac, set trunk-hunt, set
set send-name,
sls, show (trunk-group),
remove port, set cbc,
set codeset-display,
incoming-destination,
set send-name,
sls, show (trunk-group),
SLS survivability
set send-number,
show sls, show trunk-group
Possible Values
codeset6
codeset7
set cbc-parameter, set
set dial, set digits,
set incoming-dialtone,
set send-number,
show sls, show trunk-group
set
sls,
Default
Value
codeset6
set
set
set
sls,