CLI Commands
Context
interface:Serial (USP FR L2, USP PPP L2, USP PPP L2-L3)
Example
To invert the transmit clock signal on an interface:
G450-001(if:Serial 3/1:1)# invert txclock
Related Commands
bandwidth, idle-character,
nrzi-encoding
Use the nrzi-encoding command to enable the non-return-to-zero inverted (NRZI) line
coding format on the specified interface. Use the no form of the command to disable NRZI
encoding.
Syntax
[no] nrzi-encoding
User Level
read-write
Context
interface:Serial (USP FR L2, USP PPP L2, USP PPP L2-L3)
transmitter-delay
Use the transmitter-delay command to set the minimum number of flags to be sent
between successive packets. Use the no form of the command to restore the transmitter-delay
value to the default of 0.
Syntax
transmitter-delay number
no transmitter-delay
1172 Avaya G450 CLI Reference
ignore
dcd,
interface
serial, nrzi-encoding,
USP configuration
transmitter-delay