Set Spantree Forward-Delay; Set Spantree Hello-Time - Avaya G450 Cli Reference Manual

CLI Commands

set spantree forward-delay

Use the set spantree forward-delay command to specify the time used when
transferring the state of a port to the forwarding state.
Syntax
set spantree forward-delay seconds
Parameters
Parameter
seconds
User Level
read-write
Context
general
Example
To specify a forward delay of 25 seconds:
G450-001(super)# set spantree forward-delay 25
bridge forward delay is set to 25.
Related Commands
set port spantree,
spantree priority,
hello-time, set spantree
version, show spantree

set spantree hello-time

Use the set spantree hello-time command to specify the time interval between the
generation of configuration BPDU's by the root.
Syntax
set spantree hello-time seconds
1106 Avaya G450 CLI Reference
Description
The value must exceed
(Bridge Max Age / 2). The recommended
value is 15.
set port spantree cost,
set spantree default-path-cost,
max-age, set spantree
set port spantree force-protocol-migration,
set spantree enable |
priority, set spantree
Spanning tree
Possible Default
Values Value
4-30
set port
disable, set spantree
tx-hold-count, set spantree