Pppoe-Client Service-Name - Avaya G450 Cli Reference Manual

pppoe-client service-name

Use the pppoe-client service-name command to set the PPPoE Client service-name.
You can use the pppoe-client service-name command to force the PPPoE client to
connect only to access concentrators that support a specific service-name. If not set, the
PPPoE client attempts to automatically discover the service name by initiating PADI frames with
a blank service name.
Syntax
[no] pppoe-client service-name string
Parameters
Parameter
string
User Level
read-write
Context
interface:FastEthernet
Example
To set the PPPoE Client service-name to isp1:
G450-001(super-if:FastEthernet 10/2)# pppoe-client service-name isp1
Related Commands
encapsulation pppoe, mtu,
pppoe-client persistent
Description
The service name
ppp chap hostname,
delay, pppoe-client persistent
ppp chap password, ppp pap
max-attempts, pppoe-client wait-for-ipcp
Issue 1 January 2008
PPPoE (PPP over Ethernet)
Possible Default
Values Value
sent-username,
829