Copy Tftp Sw_Imageb - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
filename
ip
User Level
read-write
Context
general
Example
To download the software file,
G450-001(super)# copy tftp SW_imageA c:\imgA.bin 149.49.36.200
Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
Related Commands
copy ftp EW_archive,
EW_archive, copy tftp
announcement-file, dir,
image version

copy tftp SW_imageB

Use the copy tftp SW_imageB command to update the software image in Bank B of the
media gateway.
To use this command, you need to have an active TFTP server, and to create a file into which to
download the data. If Avaya Network Manager is running, you do not need an additional TFTP
server.
Syntax
copy tftp SW_imageB filename ip
400 Avaya G450 CLI Reference
Description
The file name, including the full path
IP address of the host
imgA.bin
copy ftp module, copy ftp
module, copy tftp
set boot bank, show boot
Possible Values
, from the TFTP server 149.49.36.200 into boot bank A:
SW_imageA,
SW_imageB, copy usb
bank, show download software
Firmware management
Default Value
copy ftp SW_imageB,
announcement-file,
status,
copy tftp
copy usb
show