Release Voip-Dsp - Avaya G450 Cli Reference Manual

release voip-dsp

Use the release voip-dsp command to release the VoIP entity from a busyout (not
available) state. This command also ends a running Bit Transfer Rate test.
Note:
Status changes that occur during the Bit Transfer Rate test create SNMP traps.
Note:
Syntax
release voip-dsp [dsp-id[/core-id]]
Parameters
Parameter
dsp-id
core-id
User Level
read-write
Context
general
Example
To release the entire VoIP engine:
G450-001(super)# release voip-dsp
To release DSP childboard #2:
G450-001(super)# release voip-dsp 2
To release core #4 in DSP childboard #1:
G450-001(super)# release voip-dsp 1/4
Related Commands
busyout voip-dsp,
voip-parameters,
Description
The slot number of the VoIP DSP
childboard
The core ID
campon-busyout voip-dsp,
test voip-dsp
Possible
Values
1-4
1-4
reset voip-dsp, show mm,
VoIP testing
Default
Value
show voip-dsp, show
Issue 1 January 2008 1199