Show Snmp Usertogroup - Avaya G450 Cli Reference Manual

Related Commands - SNMP access configuration
ip snmp, set snmp
engineID, show snmp
show snmp view,
snmp-server remote-user,
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server host,
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager

show snmp usertogroup

Use the show snmp usertogroup command to show the mapping table between SNMPv3
users and groups.
Syntax
show snmp usertogroup [username]
Parameters
Parameter
username
User Level
admin
Context
general
Example
To show the mapping table between SNMPv3 users and groups:
G450-001(super)# show snmp usertogroup
Security Model: v1
community, set snmp
group, show snmp
snmp-server community,
snmp-server
show snmp, snmp trap
snmp-server informs
Description
Specifies an SNMPv3 username
retries, set snmp timeout,
retries, show snmp
snmp-server engineID,
user, snmp-server view
auth, set snmp trap enable | disable
link-status, snmp-server enable
SNMP access configuration
show snmp, show snmp
timeout, show snmp usertogroup,
snmp-server group,
frame-relay,
notifications,
Possible Default
Values Value
Issue 1 January 2008 1075