CLI Commands
Related Commands
ip
address,
ppp
ip peer address
Use the ip peer address command to change the IP address offered by the Console or
USB interface to a requesting calling host during PPP/IPCP connection establishment. By
default, the interface offers its own IP address plus one.
Syntax
ip peer address ip-address
Parameters
Parameter
ip-address
User Level
read-write
Context
Interface: Console, USB-modem
Example
To configure the USB interface to offer requesting calling hosts the IP address 192.168.49.2:
G450-001(super-if:USB-modem)# ip peer address 192.168.49.2
Related Commands
async mode
interactive,
(interface),
timeout absolute
584 Avaya G450 CLI Reference
authentication,
shutdown (USB
Description
The IP address offered
async mode
terminal,
Modem configuration – USB modem port
modem),
timeout absolute
Possible Values
IP address
ip
address,
ppp
authentication,
Default Value
The interface IP
address plus one
shutdown