Ip Tcp Compression-Connections - Avaya G450 Cli Reference Manual

CLI Commands

ip tcp compression-connections

Use the ip tcp compression-connections command to specify the total number of TCP
header compression connections supported on the current interface. Use the no form of this
command to restore the default value of 16 connections.
Syntax
[no] ip tcp compression-connections number
Parameters
Parameter
number
User Level
read-write
Context
interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3), Dialer (L2, L2-L3, L3)
Example
To specify that 20 TCP header compression connections are to be supported in the current
interface:
G450-001(super-if:Dialer 1)# ip tcp compression-connections 20
Related Commands
clear ip rtp header-compression,
compression-connections,
non-tcp-mode,
show ip rtp header-compression
510 Avaya G450 CLI Reference
Description
The number of TCP
compression connections
clear ip tcp
ip rtp header-compression,
ip rtp port-range, ip tcp
brief,
Possible Values
3-256
header-compression,
ip rtp
header-compression,
show ip tcp header-compression
IPHC header compression
Default Value
16
ip rtp
max-period, ip rtp max-time,
show ip rtp header-compression,
ip rtp