Set Spantree Version - Avaya G450 Cli Reference Manual

CLI Commands
Example
To limit the number of hello packets to 2:
G450-001(super)# set spantree tx-hold-count 2
tx hold count is set to 2.
Related Commands
set port spantree,
spantree priority,
forward-delay,
version, show spantree

set spantree version

Use the set spantree version command to set the version of the spanning tree protocol
used by the device.
Syntax
set spantree version version
Parameters
Parameter
version
User Level
read-write
Context
general
Example
To use the rapid-spanning-tree version of spanning tree:
G450-001# set spantree version rapid-spanning-tree
Spanning tree version is set to rapid spanning tree.
1110 Avaya G450 CLI Reference
set port spantree cost,
set spantree default-path-cost,
set spantree hello-time,
Description
Version of the
spanning tree
protocol
set port spantree force-protocol-migration,
set spantree enable |
set spantree max-age,
Possible Values
common-spanning-tree — compatible
with IEEE802.1D standard
rapid-spanning-tree — compatible
with IEEE802.1W standard
Spanning tree
disable, set spantree
set spantree priority, set spantree
Default
Value
set port