Ip Dhcp Ping Packets - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
pool_id
User Level
read-write
Context
general
Example
To activate DHCP pool 5:
G450-001(super)# ip dhcp activate pool 5
Related Commands
clear ip dhcp-server
timeout, ip dhcp
dhcp-server statistics

ip dhcp ping packets

Use the ip dhcp ping packets command to enable the sending of a ping packet by the
DHCP server to check if the IP address it is about to allocate is already in use by another client.
The purpose of this feature is to prevent IP address congestion. Use the no form of this
command to disable the sending of these ping packets.
Note:
Sending a ping packet before each IP address allocation reduces the rate at
Note:
which DHCP clients can get new IP addresses from the server. Therefore, by
default, ping packets are not sent.
Syntax
[no] ip dhcp ping packets
User Level
read-write
296 Avaya G450 CLI Reference
Description
The pool index
binding, clear ip dhcp server
pool, ip dhcp-server, show ip
statistics, ip dhcp ping
dhcp-pool, show ip dhcp-server
DHCP server
Possible Default
Values Value
1-32
packets, ip dhcp ping
bindings, show ip