Set Trunk - Avaya G450 Cli Reference Manual

Related Commands
clear port static-vlan,
trunk, set vlan,

set trunk

Use the set trunk command to configure the VLAN tagging mode of a port.
Syntax
set trunk module/port {off|dot1q}
Parameters
Parameter
module
port
off
dot1q
User Level
read-write
Context
general
Example
To configure 802.1q VLAN tagging for port 6/5 in the G450:
G450-001(super)# set trunk 6/5 dot1q
Dot1Q VLAN tagging set on port 6/5.
clear vlan, icc-vlan,
show cam vlan, show port
Description
Number of the module
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 10/5-6 for
both ETH LAN ports 5-6 on the front panel.
Keyword that specifies to force the port to
become a non-tagging port and persuade
the neighboring port to become a
non-tagging port. The port becomes a
non-tagging port even if the neighbor port
does not agree to become a non-tagging
port.
Keyword that specifies IEEE 802.1q tagging
on a Fast Ethernet or Gigabit Ethernet port
interface vlan, set port
vlan-binding-mode, show
VLAN configuration
static-vlan, set port vlan,
trunk, show vlan
Possible Default
Values Value
Issue 1 January 2008
set
1187