Set Snmp Retries - Avaya G450 Cli Reference Manual

Context
general
Example
To set the read-only community string to read:
G450-001(super)# set snmp community read-only read
SNMP read-only community string set
Related Commands - SNMP access configuration
ip snmp, set snmp
group, show snmp
snmp view, snmp-server
remote-user, snmp-server
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server host,
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager

set snmp retries

Use the set snmp retries command to set the number of times to attempt to communicate
with a particular node.
Syntax
set snmp retries number
Parameters
Parameter
number
User Level
read-write
retries, set snmp timeout,
retries, show snmp
community,
user, snmp-server view
show snmp, snmp trap
snmp-server informs
Description
The number of retry attempts to make
show snmp, show snmp
timeout, show snmp user,
snmp-server engineID,
auth, set snmp trap enable | disable
link-status, snmp-server enable
SNMP access configuration
engineID, show snmp
show snmp usertogroup,
snmp-server group, snmp-server
frame-relay,
notifications,
Possible Default
Values Value
1-100000
Issue 1 January 2008
show
1067