Show Dscp-Table - Avaya G450 Cli Reference Manual

User Level
read-write
Context
ip access-control-list, ip access-control-list ip-rule, ip qos-list, ip qos-list ip-rule, ip qos-list
composite-operation
Example
To display information about composite-operation 13:
G450-001(QoS 440)# show composite-operation 13
Index Name
----- -------------------- --------- --------- ------------
13 HSPackets
Related Commands
composite-operation, cookie, destination-ip,
policy-based routing, packet
bri link, show list, source-ip,
destination-port,

show dscp-table

Use the show dscp-table command to display a specific entry in the DSCP table. If no
DSCP index is specified, the entire DSCP table is displayed.
Syntax
show dscp-table [index]
Parameters
Parameter
index
User Level
read-write
CoS
cos3
sniffing), show
tcp destination-port,
udp source-port, cos,
Description
The DSCP entry
DSCP Trust
1 No
dscp (policy), dscp-table, icmp,
composite-operation,
tcp established,
dscp (policy-based routing, packet sniffing,
Policy - QoS lists
ip-rule (policy,
show dscp-table, show isdn
tcp source-port, udp
VPN),
Possible Default
Values Value
Issue 1 January 2008
name
755