Dialer Persistent Re-Enable; Dialer String - Avaya G450 Cli Reference Manual

CLI Commands

dialer persistent re-enable

Use the dialer persistent re-enable command to set the persistent re-enable timer
after the maximum number of dial attempts has been reached. Use the no form of the command
to disable the persistent re-enable timer.
Syntax
[no] dialer persistent re-enable
User Level
read-write
Context
interface:Dialer (L2, L2-L3)
Example
To set the persistent re-enable timer after the maximum number of dial attempts has been
reached:
G450-001(if:Dialer 1)# dialer persistent re-enable
Related Commands
interface dialer,
dialer persistent initial

dialer string

Use the dialer string command to add a phone number to the dial list. Use the no form of
the command to delete a number from the dial list.
Syntax
[no] dialer string id dial-string
330 Avaya G450 CLI Reference
dialer modem-interface,
delay, dialer persistent
dialer order, dialer persistent,
max-attempts, dialer
Dialer interface
dialer persistent delay,
string, dialer wait-for-ipcp