Frequency - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
dscp (object tracking), frequency,
success-retries, type,

frequency

Use the frequency command to specify how often an RTR operation should send probes. Use
the no form of this command to restore the frequency value to the default.
Note:
You must run the type command to define the RTR operation's probing method
Note:
and the IP address of the remote device before you can use the frequency
command.
Syntax
[no] frequency frequency-value [seconds | milliseconds]
Parameters
Parameter
frequency-value
seconds
milliseconds
User Level
read-write
Context
rtr, rtr type
Example
To set the frequency value for RTR 1 to 20 seconds:
G450-001(config-rtr icmp 1)# frequency 20 seconds
598 Avaya G450 CLI Reference
next-hop (object
wait-interval
Description
A number indicating the
frequency of RTR probes
Keyword specifying to set the
frequency of RTR probes in
units of seconds
Keyword specifying to set the
frequency of RTR probes in
units of milliseconds
tracking), rtr, source-address,
Possible Values
1-60 seconds
or
1000-60,000
milliseconds
Object tracking
Default Value
5 seconds
or
5000
milliseconds