Show Ip Ospf Interface - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
ip ospf authentication,
hello-interval, ip ospf
ospf router-id,
protocols

show ip ospf interface

Use the show ip ospf interface command to display OSPF-related interface information.
If no interface name is specified, information for all interfaces is displayed.
Syntax
show ip ospf interface [interface_name]
Parameters
Parameter
interface_name
Note:
To specify an interface name that includes spaces, enclose the entire name in
Note:
quotation marks (for example, "New York").
User Level
read-only
Context
general
Example
To display OSPF information for all interfaces:
G450-001(super)# show ip ospf interface
sh ip ospf interface
Showing 1 OSPF Interfaces
Vlan 1.0 is up
Internet Address 1.1.1.1, Mask 255.255.255.0
AS Router ID 1.1.1.1, COST 1
Transmit Delay 1, State DR,
DRId 1.1.1.1, IpAddress 1.1.1.1
632 Avaya G450 CLI Reference
ip ospf authentication-key,
message-digest-key,
router ospf, show ip ospf,
Description
The OSPF interface name
Priority 1
ip ospf cost,
ip ospf network point-to-multipoint,
show ip ospf interface,
, Area 0.0.0.0
ip ospf dead-interval,
ip ospf
show ip ospf neighbor,
Possible
Values
string
OSPF
ip ospf
priority, ip
show ip
Default
Value