Dscp (Object Tracking) - Avaya G450 Cli Reference Manual

CLI Commands
Example
To specify ICMP Echo operation for RTR probes of the remote device at IP address
137.42.11.1:
G450-001(config-rtr 1)# type echo protocol ipIcmpEcho 137.42.11.1
G450-001(config-rtr icmp 1)#
To specify TCP Connection operation for RTR probes at port 80 of the remote device at IP
address 147.42.11.1:
G450-001(config-rtr 2)# type tcpConnect dest-ipaddr 147.42.11.1 dest-port 80
G450-001(config-rtr tcp 2)#
Related Commands
dscp-table, fail-retries, frequency,
success-retries,

dscp (object tracking)

Use the dscp command to set the DSCP value in the IP header of an RTR operation's probe
packets. Use the no form of this command to restore the value to the default value of 48.
Note:
You must run the type command to define the RTR operation's probing method
Note:
and the IP address of the remote device before you can use the dscp command.
Syntax
[no] dscp dscp
Parameters
Parameter
dscp
User Level
read-write
Context
rtr, rtr type
596 Avaya G450 CLI Reference
next-hop (object
wait-interval
Description
The dscp value
tracking), rtr, source-address,
Possible Values
0-63
Object tracking
Default Value
48